VB31AT

Passiver Zweidraht- Sender/Empfänger Video- und Spannungsübertragungs Combiner, 10MHz, CAT2, BNC, RJ45, 225m

Nitek Art.-Nr.: VB31AT

2 Artikel auf Lager.
Sofort versandfertig, Lieferzeit ca. 1-3 Werktage

    49,00 € *

zzgl. MwSt. zzgl. Transportkostenpauschale

Size w/mounting tabs  0.9''H x 1.0''W x 2.0''D
Power Requirements  NONE REQUIRED
Power Pass Through  250mA @ 1,000 feet (300 meters) on 24 AWG
1 Amp @ 100 feet (30 meters) on 24 AWG
Video Input   1 vpp composite video
monochrome or color
Output  Balanced low voltage current loop
Modular Jack  Standard RJ45 System
Video Format  RS170, NTSC, PAL, SECAM,
CCIR (Color or B/W)
Video Input  1 vpp composite video
monochrome or color
Operating Frequency   DC to 10 MHz
Common Mode Rejection  >60 dB typ.
Temperature Range  0 degrees C to +85 degrees C
Humidity Range  0 to 98%, non-condensing
Twisted Pair Connection  RJ45 modular connector
Transient Immunity  Built-in
Wire Spec   26 to 12 AWG Unshielded Twisted
Pair (UTP) 
DC Loop Resistance   51 Ohms/1,000 feet (max) (51 Ohms/300 meters) 
Normal Capacitance   17pF/ft.
Impedance  100 Ohms +/- 20% 
UTP Category   2 or better
The Nitek Video and power balun combiner provides video and camera power over a single CAT5 for CCTV twisted pair video transmission up to 750 feet (225 meters) in conventional UTP analog Video applications, 100 meters in TIA/EIA 568 applications.
The VB31AT is a unique UTP power and video balun which provides an economical means of sending video and camera power over a standard category cable. Video is sent over one pair and camera power is sent over two of the remaining pairs. A mini-coax pigtail with male BNC is used on the VB31AT. A pair of wires are provided for power connection. Connections to the Category cable are made via an RJ45 connector.
The VB31AT passive UTP power and video balun combiner provides the same high immunity to noise and interference as all of the Nitek baluns for CCTV transmission. This simplified wiring scheme provides a convenient method of powering the camera and allowing for quicker and easier installations. The RJ45 modular jack uses standard 568B wiring so spare network cables can be used. The VB31AT is a UTP transceiver that provides another Security Transmission Solution from Nitek.



Zum Newsletter anmelden: